General Precautions; How To Use This Guide - Aiphone IS SERIES Quick Start Programming Manual

General Precautions

HOW TO USE THIS GUIDE

This guide is intended to be used for a single site IS-IP system that includes IS-IP door stations, IS-IPMV master
stations, and IS-SOFT PC master stations.
Note: When using the IS-IPC or when multiple sites are required, refer to the IS-IP Standard Setting Manual.
IMPORTANT:
The saved data will be applied to the system when the system is updated.
Step 1:
System Layout
available, use a CAT-5e cable to connect the PC to each device one at a time.
Step 2:
order to connect to the IS-IP devices.
A. Open Control Panel
®
Connection Status window.
®
Local Area Connection to open the Local Area Connection Status window.
B. Click the Properties button to open Local Area Connection Properties window.
C. Scroll down and left click Internal Protocol
Properties window.
D. Select the Use the following IP address
Connection Properties window to accept these changes.
Temporarily stored to save data prior to leaving each screen.
(not required if using a DHCP server)
Network Connections
Network and Internet
Double click Local Area Connection to open
View network status and tasks
Properties button to open Internet Protocol
Click