General Overview - Aiphone IS SERIES Quick Start Programming Manual

Terminology
Area
Site
Host
Client
for operational instructions. Any IS-IPDV, IS-IPDVF, IS-IPMV, IS-SOFT, or IS-IPC can be a Client.
DHCP
LAN
connecting multiple LANs together, the only supported network layout for this guide is a LAN or a VPN.
VPN
other through a public network without losing privacy. For the purposes of the IS system, it can be
considered a single LAN.
IGMP
IS system. This protocol must be supported by and enabled on the networking hardware.
Multicast Multicasting is a method of communicating a single stream of information, such as video or paging
announcements, from a single host to many hosts. This saves bandwidth compared with sending the same
packets to each recipient one at a time. The IS system uses Multicast for video during the call-in, but not

General Overview

Step 1: System Layout
- Choose host and clients.
Step 2:
- Allows the PC to communicate with the IS-IP devices.
Step 3:
Step 4:
Step 5: Change the Network Settings: Individual for each Client
- Setting the IP address and assigning the client to the Host.
Step 6:
- Setting the IP address and naming the system.
Step 7:
- Find client devices through the host.
Step 8: Register the station numbers and names
- Assigning numbers and names to each station.
Step 9: Advanced station settings for video door stations
Step 10: Time and date setting
- Updating the time and date displayed on the master(s).
Step 11: Update the system with all stored data
- Uploading all settings to the system.