Memory Functions - Mercedes-Benz S-Class 2011 Operator's Manual

The mirrors do not go into anti-glare mode if
reverse gear is engaged or the interior lighting
is switched on.
Parking position for the exterior
mirror on the front-passenger side
Setting and storing the parking position
You can position the front-passenger side
exterior mirror in such a way that you can see
the rear wheel on that side as soon as you
engage reverse gear. You can store this
position.
X
Make sure that the vehicle is stationary and
that the SmartKey is in position 2 in the
ignition lock.
X
Press button = for the exterior mirror on
the front-passenger side.
X
Engage reverse gear.
The exterior mirror on the front-passenger
side moves to the preset parking position.
X
Use adjustment button ; to adjust the
exterior mirror to a position which allows
you to see the rear wheel and the curb.
The parking position is stored.
i If you shift the transmission to another
position, the exterior mirror on the front-
passenger side returns to the driving
position.
i
You can also store the parking position
using memory button M :.
X
With the SmartKey in position 2 in the
ignition lock and with the exterior

Memory functions

mirror on the front-passenger side
activated, use adjustment button ; to
set the exterior mirror such that the
rear wheel and curb are visible.
X
Press memory button M : and one of
the arrows on adjustment button ;
within three seconds.
The parking position is stored if the
exterior mirror does not move.
If the mirror moves out of position, repeat
the steps.
Calling up a stored parking position
setting
X
Turn the SmartKey to position 2 in the
ignition lock.
X
Adjust the exterior mirror on the front-
passenger side with the corresponding
button ( Y page 109).
X
Engage reverse gear.
The exterior mirror on the front-passenger
side moves to the stored parking position.
The exterior mirror on the front-passenger
side moves back to its original position:
as soon as you exceed a speed of 6 mph
R
(10 km/h)
about ten seconds after you have
R
disengaged reverse gear
if you press button ? for the exterior
R
mirror on the driver's side
Memory functions
Storing settings
With the memory function, you can store up
to three different settings, e.g. for three
different people.
The following settings are stored as a single
memory preset:
111
Z