System Settings - Mercedes-Benz S-Class 2011 Operator's Manual

Display Status
Green The headphones are switched
on and the batteries are fully
charged.
Red The headphones are switched
on and the batteries are
almost discharged.
No display The headphones are switched
(dark) off, or the batteries are
empty, incorrectly inserted or
not inserted.
Connecting additional headphones
You can connect an additional set of corded
headphones to each rear-compartment
screen ( Y page 137).
Changing batteries
Batteries are required for the remote control
and for the two sets of cordless headphones.
For changing batteries: (

System settings

Vehicle equipment
i These Operating Instructions describe all
standard and optional equipment available
for your vehicle at the time of purchase.
Please note that your vehicle may not be
equipped with all features described.
Display settings
Switching the display on/off
X
Vehicle
Select by turning cVd the
COMAND controller and press W to
confirm.
X
Display off
Select
COMAND controller and press W to
confirm.
Y page 243)
by turning cVd the
System settings
X
To switch on the display: press W or
cVd turn the COMAND controller.
Display design
Your COMAND display features optimized
designs for operation during daytime and
night-time hours. You can customize the
design to suit your personal preferences by
manually selecting day or night design or opt
for an automatic setting.
X
Vehicle
Select by turning cVd the
COMAND controller and press W to
confirm.
X
System
Select by turning cVd the
COMAND controller and press W to
confirm.
X
Display
Select and press W to confirm.
X
Day design,
Select
Automatic
by turning cVd the COMAND
controller and press W to confirm.
The # icon indicates the current setting.
Design Explanation
Day design
The display is set
permanently to day
design.
Night design The display is set
permanently to night
design.
Automatic
The display design
changes depending on
the brightness around
the vehicle.
Automatic
i In the
evaluates the readings from the automatic
vehicle light sensor and switches between
the display designs automatically.
Night design
or
setting, COMAND
Z
141