Mercedes-Benz S-Class 2011 Operator's Manual page 379

Maintenance menu
Service
In the menu you can:
call up display messages (
R
check the tire pressure electronically
R
( Y page 487)
call up the service due date (
R
check the oil level (
R
Menu settings
Introduction
Settings
In the menu, you have the following
options:
switching the daytime running lamps on/
R
off
switching Adaptive Highbeam Assist on/
R
off
showing or hiding the additional
R
speedometer
selecting the units for speed and distance
R
switching the belt adjustment on/off
R
activating/deactivating the radar sensor
R
system
Switching the daytime running lamps
on/off
This function is not available in Canada.
If you have activated the
Lights
function and the light switch is set to
$ or c, the daytime running lamps are
switched on automatically when the engine is
running.
In the dark, the following also light up:
the side lamps
R
the tail lamps
R
the license plate lamp
R
the side marker lamp
R
If you turn the light switch to a different
position, the corresponding lights are
switched on. If you switch off the daytime
running lamps at night, make sure that the
light switch is set to L or c.
Y page 380)
Y page 452)
Y page 447)
Day Running
Menus and submenus
The factory setting is Enabled.
X
Press the = or ; button on the
steering wheel to select the
menu.
X
Press the 9 or : button to select
Day Running Lights.
X
Press the a button to confirm.
X
To activate/deactivate: press a
again.
Switching Adaptive Highbeam Assist
on/off
X
Press the = or ; button on the
steering wheel to select the
menu.
X
Press the : or 9 button to select
Adapt. High-beam
X
Press the a button to confirm.
X
To activate/deactivate: press a
again.
Switching the additional speedometer
on or off
An additional digital speedometer can be
shown in the multifunction display.
Vehicles with a kilometer speedometer: the
digital speedometer has mph units.
Vehicles with a miles speedometer: the digital
speedometer has km/h units.
X
Press the = or ; button on the
steering wheel to select the
menu.
X
Press 9 or : to select
Speedometer.
X
Press the a button to confirm.
X
Press the a button to save the setting.
Selecting the unit of measurement for
distance
TheDisplay Unit Speed-/Odometer
function allows you to choose whether
certain displays appear in km/h or mph.
Settings
Settings
Asst..
Settings
Add.
Z
377