Mercedes-Benz S-Class 2011 Operator's Manual page 257

X
Subtitles
Select
press the 9 button to confirm.
In both cases, a menu appears after a few
seconds. The # dot in front of an entry
indicates the current setting.
X
Select a setting using the 9:
buttons and press the 9 button to confirm.
X
To exit the menu: press the =
or ; button.
Interactive content
DVDs can also contain interactive content
(e.g. a video game). In a video game, you may
be able to influence events by selecting and
triggering actions. The type and number of
actions depend on the DVD.
X
Select an action using the
9;:= buttons on the
remote control and press the 9 button to
execute it.
A menu appears and the first entry,
Select, is highlighted.
X
Press the 9 button.
AUX mode
Introduction
You can connect one external video source to
each of the displays of the Rear Seat
Entertainment System (AUX display) and also
one external video source to the rear-seat
CD/DVD drive (AUX drive) with a sound and
video signal.
Please see the corresponding operating
instructions for information on how to
operate the external video source.
For further details about external video
sources, please consult an authorized
Mercedes-Benz Center.
Camera angle
or and
Rear Seat Entertainment System
Connecting AUX equipment
AUX drive
The AUX drive jacks are located on the CD/
DVD drive on the right next to the CD/DVD
eject button ( Y page 139).
Display AUX
The AUX display jacks are located on the side
Y
of the screen ( page 137).
Audio and video connection
X
Insert the audio plugs for the left and right
signals into the corresponding L and R
jacks.
X
Insert the video plug into the V jack.
Activating AUX mode
AUX drive
X
Aux
Select in the menu using the
9=; buttons on the remote
control and press the 9 button to confirm.
The AUX menu appears.
X
Source
Select from the AUX menu and
press the 9 button to confirm.
X
Disk drive Aux
Select
button to confirm.
You will hear and see the content of the
external video source if it is connected to
the CD/DVD drive and switched to
playback. If no video image is available
from the AUX source connected, you will
see an audio menu.
Display AUX
X
Select the screen to which the external
video source is connected using the remote
control ( Y page 123).
X
Aux
Select in the menu using the
9=; buttons on the remote
control and press the 9 button to confirm.
255
and press the 9
Z