At a glance
140
Cordless headphones
Overview
Volume control
:
To select a screen for the headphones
;
Battery tray cover
=
Switching the cordless headphones on/off
?
Indicator lamp, differing displays (
A
X
Open both sides of the headphones and adjust the fit of the headphones by pulling the
headphone band in the direction of the arrow.
Switching the cordless headphones on/
off
X
Press button ?.
Depending on the previous state, the
headphones are switched on or off. To save
the battery, the headphones are switched
off automatically if they do not receive a
signal within three minutes.
Adjusting the volume of the headphones
X
Turn volume control : until you have
reached the desired volume.
i
If you have connected corded
headphones to a rear-compartment
screen, you can adjust the volume by
Y
page 140)
pressing buttons C on the remote control
(
Y
page 138).
Selecting a screen for the headphones
X
Move push slider ; to L (left-hand screen)
or R (right-hand screen).
Indicator lamp displays
The color of the indicator lamp shows
whether the headphones are switched on or
off and indicates the charge level of the
batteries inserted.