Table of Contents
Advertisement
Vehicle
264
cVd the COMAND controller and press
W to confirm.
The climate control menu opens.
X
To switch on: select Æ and press W.
X
To switch off: select Æ and press W.
A tick appears.
Controlling climate control centrally
You can use the
air-conditioning zones in the vehicle to the
same settings. If the
switched on and you adjust climate control
on the driver's side, these changes will also
be made in all the air-conditioning zones.
X
Select the climate control main menu in the
air-conditioning function bar by turning
cVd the COMAND controller and press
W to confirm.
The climate control menu opens.
X
Mono
Select
and press W.
A tick appears when the function is
selected.
Mono
The
function is automatically switched
off if you:
Mono
function to set all the
Mono
function is
change settings for automatic climate
R
control on the front-passenger side using
COMAND
press one of the rocker switches to operate
R
automatic climate control on the front-
passenger side
press one of the rocker switches on the
R
rear-compartment control panel
Adjusting the footwell temperature
Footwell temperature
You can use the
function to set the temperature difference
between the footwell and the rest of the
vehicle interior.
i
This setting is quite effective in automatic
mode, especially at low outside
temperatures.
The greater the value you set, the higher the
temperature in the footwell.
X
Select the climate control main menu in the
air-conditioning function bar by turning
cVd the COMAND controller and press
W to confirm.
The climate control menu opens.
X
Footwell temperature
Select
W.
A scale appears.
X
To change the temperature difference:
slide ZVÆ or turn cVd.
X
To confirm your selection: press W.
and press
Advertisement
Chapters
Table of Contents
