Mercedes-Benz S-Class 2011 Operator's Manual page 272

Vehicle
270
X
Upload/download data
Select
W to confirm.
X
Copy data to storage medium
Select
and press W to confirm.
X
Select the storage medium to which the
data should be copied.
X
Start
Select
COMAND checks whether the storage
medium has enough storage capacity. If
there is enough storage capacity, the data
is copied to the storage medium.
X
If there is not enough storage capacity,
remove the storage medium. Make more
storage space available on the storage
medium. Then, try to copy the COMAND
data to the storage medium again.
X
Remove the storage medium.
Transferring data to another system
(vehicle)
X
Insert/connect the storage medium (SD
card or USB stick) with the saved data into/
to the relevant interface.
X
Vehicle
Select
turning cVd the COMAND controller and
press W to confirm.
The "Vehicle" menu appears.
X
System
Select
X
Upload/download data
Select
W to confirm.
X
Import data from storage
Select
medium
and press W to confirm.
X
Start data
Select
A prompt appears, asking whether the
COMAND data should be overwritten.
X
Yes
Press to confirm that the data saved in
COMAND should be overwritten.
COMAND imports the data and restarts the
system.
or
X
No
Press to cancel the import process.
and press
copying.
in the main function bar by
and press W to confirm.
and press
import.