Mercedes-Benz S-Class 2011 Operator's Manual page 133

Option 1
X
Select 4 or 5 in the character bar and
press W to confirm.
The input menu shows the data field
selected.
Cursor in next data field
:
To store an entry
;
4 and 5 icons to select a data field
=
Option 2
X
Slide ZV the COMAND controller
repeatedly until the character bar
disappears.
X
Select the data field by sliding ZVÆ and
press W to confirm.
Storing an entry
X
Select ¬ in the character bar by turning
cVd the COMAND controller and press
W to confirm.
The entry is stored in the address book.
Further functions available in the
character bar
X
To switch the character bar to upper/
lower-case characters: select * or
E and press W to confirm.
X
To switch the character set: select
p and press W to confirm.
The character set switches between
upper/lower-case letters and digits.
X
To change the language of the
character bar: select B and press W
to confirm.
X
Select the language by turning cVd the
COMAND controller and press W to
confirm.
X
To reposition the cursor within the data
field: select 2 or 3 and press W to
confirm.
Cursor (repositioned)
:
2 and 3 icon to reposition the cursor
;
X
Delete the character/entry (
Basic functions of COMAND
Switching COMAND on/off
X
Press the u function button on the
center console.
i If you switch off COMAND, playback of
the current audio or video source will also
be switched off. You cannot switch off
COMAND while making a call via COMAND.
You can also make phone calls using the
buttons on the multifunction steering
wheel when COMAND is switched off
( Y page 365).
At a glance
131
Y page 129).
Z