Setup - Cortelco Colleague 2220 Owner's Instruction Manual

SETUP

After the adapter is connected, the display will show as indicated below for setting.
1. [ SELECT LANGUAGE ] appears on the display. "1.ENG"and"2.ESP" will flash for
you to choose to view your message in English or Spanish. This will only flash for a
short time before going into standby mode.
a. Press 1 to select ENG (English), or press 2 to select ESP (Spanish). A check
mark moves to the selection you have made.
b. Press DOWN button to confirm the selection, and the screen will display the
next setting option.
2. This telephone has been specially designed to allow programming of up to four
different area codes.
a. When [ ENTER AREA CODE ] appears, use the keypad1-0 to enter the area
code. After you finish all three digits, press DOWN button to confirm, and the
ENTER 2ND CODE" will be displayed for programming.
b. Use the same procedure as in step 1 to program the 2ND, 3RD and 4TH area
codes.
c. The DOWN button can be used as a skip feature. For example, if there are only
two area codes to be programmed, when "ENTER 3RD CODE" and "ENTER
4TH CODE" appear, press the DOWN button to confirm, and the screen will
display the next setting option.
3. When [SET ACCESS CODE] appears, enter the desired access code using the
keypad. Press DOWN button to confirm.
Access Code is used to obtain an outside line when using a PBX and some
Centrex applications. This feature can be used with Caller ID and Memory
Locations.
4 . When [ FLASH TIMER (MS)] appears, press EDIT button to set the desired Flash
Timer.
a. Use LEFT button to decrease the timer by 50 ms. (Min. 100 ms)
b. Use RIGHT button to increase the timer by 50 ms. (Max. 1000 ms)
c. Press DOWN button to confirm, and the screen will display the next setting
option.
The Code can range from _ to 9. The
4