Cadillac SRX 2010 Owner's Manual page 85

srx.book Page 53 Monday, June 8, 2009 8:28 AM
1.3 Attach and tighten the lower
attachments on the child
restraint to the lower
anchors.
2. If the child restraint manufacturer
recommends that the top tether
be attached, attach and tighten
the top tether to the top tether
anchor, if equipped. Refer to the
child restraint instructions and the
following steps:
2.1 Find the top tether anchor
and open its cover to expose
the anchor.
2.2 Route, attach and tighten the
top tether according to your
child restraint instructions
and the following
instructions:
If the rear outboard seating
position you are using has
an adjustable head restraint
and you are using a dual
tether, route the tether
around the head restraint.
2-53
If the rear outboard seating
position you are using has
an adjustable head restraint
and you are using a single
tether, raise the head
restraint and route the tether
under the head restraint and
in between the head restraint
posts.
3. Push and pull the child restraint
in different directions to be sure it
is secure.