Cadillac SRX 2010 Owner's Manual page 211

srx.book Page 49 Monday, June 8, 2009 8:28 AM
Changing the Bluetooth Code
When a Bluetooth connection is set
up for the first time with the mobile
phone portal a standard code is
displayed that can be changed at any
time. At least a four-digit and
randomly selected code should be
used for security reasons.
Select Change Bluetooth code, edit
the current Bluetooth code in the
menu displayed and confirm the
changed code with OK.
Connecting a Logged-On Mobile
Phone
Choose the desired mobile phone
and select the option Select in the
menu displayed.
As soon as the mobile phone portal
has detected the mobile phone, the
connection setup can be confirmed.
The mobile phone can be operated
via the mobile phone portal.
Logging Off the Mobile Phone
Select the desired mobile phone in
the device list. In the menu displayed
select Delete and confirm the
subsequent message.
Sending an Emergency Call
Dial the emergency call number.
The telephone connection to the
emergency call centre is set up.
Answer when the service personnel
question you about the emergency.
6-49
Telephone Operation
Introduction
As soon as a connection via
Bluetooth has been set up between
your mobile phone and the
Infotainment system, you can also
operate many functions of your
mobile phone via the Infotainment
system.
You can set up a connection via the
Infotainment system with the call
numbers stored in your mobile phone
or change the call numbers.
As a rule operation via the mobile
phone continues to be possible, e.g.
taking a call or adjusting the volume.
After setup of a connection between
the mobile phone and the
Infotainment system the mobile
phone data is transmitted to the
Infotainment system. This can take
some time depending on the phone
model. During this period operation
of the mobile phone is possible via
the Infotainment system only to a
restricted extent.