Cadillac SRX 2010 Owner's Manual page 200

srx.book Page 38 Monday, June 8, 2009 8:28 AM
6-38
Changing the Source on the Video
Display Screens
The image from the auxiliary device
can be switched between the video
display screens.
To change the display:
1. Press the AUX button on the
remote control to change the
source of both video screens
from the DVD player to the
auxiliary device.
2. Press the AUX button a second
time to change the left video
screen source to the DVD player
and the right video screen to the
auxiliary device.
3. Press the AUX button a third time
to change the left video screen
source to the auxiliary device and
the right video screen to the DVD
player.
4. Press the AUX button a fourth
time to change the source of both
video screens to the DVD player.
How to Change the RSE Video
Screen Settings
The screen display mode,
brightness, and language can be
changed from the setup menu using
the remote control. To change a
setting:
z
1. Press .
n q p o r
2. Use , , , and select
the settings.
z
3. Press again to exit the setup
menu.
Audio Output
Audio from the DVD player or
auxiliary inputs can be heard through
the following:
• Wireless Headphones
• Vehicle Speakers
• Vehicle wired headphone jacks on
the rear seat audio system, if the
vehicle has this feature.
The RSE system transmits the audio
signal to the wireless headphones if
an audio signal is available. See
"Headphones" earlier in this section
for more information.
Audio can be heard from the wired
headphone jacks on the RSA system
by selecting the desired source from
the RSA system, if the vehicle has
this feature.
The front seat passengers are able
to listen to playback from the A/V
jacks through the vehicle speakers
by selecting Rear A/V as the source
on the radio.