Cadillac SRX 2010 Owner's Manual page 29

srx.book Page 25 Monday, June 8, 2009 8:28 AM
Programming the Power
Windows
Programming the power windows
may be necessary if the vehicle's
battery has been disconnected or
discharged
If the window will not express up
after power has been restored and a
message is displayed in the Driver
Information Center:
1. Close all doors
2. Place the ignition in
ACC/ACCESSORY or
ON/RUN/START.
3. From any partial open position,
close the window and continue to
press the switch briefly after the
window has fully closed.
Obstacle Detection Feature
The Obstacle Detection Feature is
part of the express-up feature and is
active:
1. In the middle and upper portions
of the window opening.
2. During window up movements.
3. In ignition OFF during all window
up movements and during
express-up window movements
in ignition ON/RUN/START.
If there is something blocking the
window during automatic closing, the
window will reverse direction for a
short distance. Weather conditions
such as extreme cold and/or ice may
cause the window to auto-reverse.
The window will return to normal
operation once the object or
condition is removed.
1-25
If conditions prevent the window from
closing and the window continues to
auto-reverse, it is possible to close
the window with the ignition in
ON/RUN/START by holding the
window switch in the partially or fully
pulled up position. Release of the
switch from the partially pulled up
position will cause the window to
stop. Release of the switch from the
fully pulled up position will activate
the express-up and related obstacle
detection features.
Overload
If the windows are repeatedly
operated within a short time, the
window operation is disabled for a
short time.