Cadillac SRX 2010 Owner's Manual page 324

srx.book Page 28 Monday, June 8, 2009 8:28 AM
9-28
Rear Wiper Blade Replacement
The rear wiper blade and wiper arm
have a cover for protection. The
cover must be removed before the
wiper blade can be replaced.
To remove the cover:
1. Slide a plastic tool under cover
and push upward to unsnap.
2. Slide cover towards wiper blade
tip to unhook from blade
assembly.
3. Remove the cover.
4. After wiper blade replacement,
ensure that cover hook slides into
slot in blade assembly.
5. Snap cover down to secure.
To remove the wiper blade:
1. Lift the wiper arm away from the
windshield.
A. Wiper Arm
B. Release Lever
C. Blade Assembly
2. Push the release lever (B) to
disengage the hook and push the
wiper arm (A) out of the blade
assembly (C).
3. Push the new blade assembly
securely on the wiper arm until
the release lever clicks into place.
4. Replace wiper cover.