Specifications - Datavideo SE-2800 Instruction Manual

DIGITAL VIDEO SWITCHER

Specifications

Inputs
Outputs
Video Input
Preview Outputs
Other Interface
HD SDI signal
SD SDI signal
Operating Temperature
Humidity
Dimension & Weight
Power
42
• Maximum 12 inputs, can be configurable to
12 HD SDI, 12 SD SDI, 6 CVBS or 3 HDMI
• Possible combination, for example 10 HD SDI + 2 HDMI, or 3 HD SDI + 3 HDMI + 6 CVBS
• 3 BNC output connectors for SDI Outputs
• 2 HDMI for Multi-screen (v.1.1)
• RJ-45 for PC Remote controls
• 2 BNC for Sync-In and Sync-Out
• DB-9 for Console
• HD/SDI: 1920 x 1080i/50, 1920 x 1080i/60, 1920 x 1080i/59.94
• SD: PAL 720 x 576 /50Hz
• SD: NTSC 720 x 480 /59.9Hz
• SD: NTSC 7.5 IRE (US standard)/ 0 IRE (Japan standard) options
• HDMI 1920 x 1080i/50
• HDMI 1920 x 1080i/59.94
• HDMI 1920x1080i/60Hz
• HDMI 720 x 576 /50Hz
• HDMI 720x480i/60Hz
• Y:Cb:Cr, 4:2:2 10 bit
• 2x HDMI output
• Way 1:
HDMI 1 Multiscreen1: 9 smaller windows for inputs 1-9 with embedded audio level
indication (group1, channel 1)
HDMI 2 Multiscreen2: 3 smaller windows for inputs 10-12 with embedded audio level
indication (group1, channel 1) + 2 bigger windows for Preview + Program,
embedded audio level indication for Program (group1, channel 1)
• Way 2:
HDMI 1 Multiscreen1- 12 smaller windows for inputs 1-12 with embedded audio
level indication (group1, channel 1) + 2 bigger windows for Preview and Program.
embedded audio level indication for Program (group1, channel 1)
HDMI 2 Multiscreen2 : Program, Multiscreen 1
• Way 3:
HDMI 1 Multiscreen1- 8 smaller windows for inputs 1-8 with embedded audio
level indication (group1, channel 1) + 2 bigger windows for Preview and Program.
embedded audio level indication for Program (group1, channel 1)
HDMI 2 Multiscreen 2 : Program, Multiscreen 1
• Resolution is 1920x1080i
• Serial D-Sub 9 Pin x 1 RS422
• Tally Output D-Sub 25 Pin x 12 Channel Open Collector Output
• Support Line mode
• GPI port
SMPTE 292M standard complied with
• Output return loss : More than 15 dB (5MHz to 750MHz)
More than 10 dB (750MHz to 1.5 GHz)
• Output level : 0.8 Vpp ± 10%
• Rise time : Less than 270 ps
• Fall time : Less than 270 ps
• Difference between rise time and fall time within 100 ps
• Alignment jitter : Less than 0.2 UI
• Timing jitter : Less than 1.0 UI
• Eye aperture ratio : More than 90%
• DC offset : 0 ± 0.5V
• Equalizer use 5C-FB cable support 100 meters
Analog Y/C, Composite CCIR601 NTSC and PAL
• 0°C to 40°C (32°F to 102°F)
• 10% to 90% (non condensing)
Base Unit : 482mm (W) x 93mm (H) x 302mm (D) = 5.08 Kg ( 11.20 lbs )
Above W and H includes rack ears and feet
Control Panel : 431mm (W) x 83mm (H) x 320mm (D) = 2.44 Kg ( 5.38 lbs )
Above H is from desk surface to top of T-Bar in lowest position
• Input AC 100 ~ 240V Switching Adaptor, output DC 12V / 5A (48W)
( Below based on SE-2800 12 channel unit )