How To Obtain Software Or Firmware For The Se-2800; How To Update The Se-2800 Firmware - Datavideo SE-2800 Instruction Manual

How to obtain software or firmware for the
SE-2800
The latest Firmware updates and Software applications for this switcher can be obtained by contacting
your local Datavideo office or dealer. A list of regional Datavideo offices is provided at the rear of this
manual.

How to update the SE-2800 Firmware

From time to time Datavideo may release new
firmware to fix reported bugs in the current SE-
2800 firmware or to add a new feature. Customers
can update the SE-2800 firmware themselves if
they wish or they can contact their local dealer
or reseller for assistance should they prefer this
method.
This page describes the firmware update process
for the complete unit, if you have all the items
required it should take approximately 1 hour 20
minutes total time to complete.
Once started the update process should not be
interrupted in any way as this could result in a
non-responsive unit.
As well as a working SE-2800 you will need:
■ The latest Firmware update file for the SE-2800.
This can be obtained from your local Datavideo
office or dealer.
The SE-2800 power supply.
■
The SEConfig software.
■
A Windows 7 computer with an Ethernet port.
■
An Ethernet cable.
■
To update the SE-2800 firmware:
1. Switch off or shut down the SE-2800 and
Computer in the normal way.
2. Connect the Ethernet cable between the SE-
2800 rear panel and the Windows 7 Computer.
3. Turn on the Windows 7 Computer.
4. Unzip the firmware update folder to the
Computer Desktop so the file within it is easy
to locate.
5. Double click the firmware update icon to launch
the Flash Update Utility.
6. Confirm the supported devices list says SE-
2800 then click NEXT.
SE-2800
INSTRUCTION MANUAL 35