Operating The Base Station On The Pabx; Changing The Dialing Mode; Setting Recall; Setting Access Codes (External Line Prefixes) - Siemens Gigaset A580 User Manual

Operating the base station on the PABX

Operating the base station on the PABX
The following settings are only necessary when your PABX requires them; see
the PABX user guide. The settings only affect fixed line network connections.

Changing the dialing mode

You can set the dialing mode.
¢
§§Menu§
Tone / Pulse
a
Please note
u
Suffix dialing (for selecting the connection) is not possible in conjunction
with pulse dialing: a pound "#" is displayed during dialing but ignored when
pulse dialing is used.
u
Enter an asterisk "*" to switch temporarily to touch tone dialing. The asterisk
is not displayed.

Setting recall

Your phone is preset at the factory for operation on the main connection (recall
250 ms). For operation on a PABX, you may have to change this value. Please
refer to the user guide for your PABX.
¢
§§Menu§
q
The current setting is indicated by ‰.
a

Setting access codes (external line prefixes)

Depending on your PABX, to obtain an external line you must dial an access
code before making external calls. You can store this access code in your
phone. It is then added automatically to the numbers, e.g. when dialing using
the Calls list.
¢
§Menu§
Access Code
~
a
94
¢ ¢
Settings Base
Select and press
§OK§
Press and hold (idle status).
¢ ¢
Settings Base
Select recall and press
Press and hold (idle status).
¢ ¢
Settings Base
Select and press
§OK§
Enter or edit the access code (maximum 3 characters) and
press .
§OK§
Press and hold (idle status).
¢
Telephony Fixed line
(‰ = on).
¢
Telephony Fixed line
.
§OK§
Additional Features
.
¢
Dialing Mode
¢
Recall