11
SERVICE WORK ON THE CHASSIS
11.43
Checking the swingarm
11.44
Checking the throttle cable routing
11.45
Checking the rubber grip
x
–
Check the swingarm for damage, cracking, and deformation.
»
If the swingarm shows signs of damage, cracking, or deformation:
–
Change the swingarm.
401520-01
Preparatory work
–
Remove the seat. (
–
Remove the fuel tank.
Main work
–
Check the throttle cable routing.
Both throttle cables must be routed to the throttle valve body side by side behind
the handlebars and above the fuel tank bracket.
»
If the throttle cable is not routed as specified:
–
Correct the throttle cable routing.
B01929-10
Finishing work
–
Install the fuel tank.
–
Mount the seat. (
–
Check the rubber grips on the handlebar for damage and wear and to ensure they
are firmly seated.
»
If a rubber grip is damaged, worn or loose:
–
Change and secure the rubber grip.
Rubber grip adhesive (00062030051) (
401197-01
x
Info
A damaged swingarm must always be changed. Repair of the
swingarm is not authorized by Husqvarna.
p. 42)
(
p. 46)
x
(
p. 47)
x
p. 42)
p. 92)
52