Closing The Filler Cap; Cold Start Button - Husqvarna 2014 FC 450 EU Owner's Manual

6 CONTROLS
6.10

Closing the filler cap

6.11

Cold start button

–
Turn filler cap
B01832-10
–
Mount filler cap
Info
Run the fuel tank breather hose
B01833-10
The cold start button
When the engine is cold and outside temperatures are low, the injection system extends
the injection time. To combust the increased amount of fuel, the engine is supplied with
additional oxygen by pulling the cold start button.
Possible states
The cold start button is activated – The cold start button is pulled out all the way.
•
The cold start button is deactivated – The cold start button is pushed in all the way.
•
B01922-10
1 counterclockwise and lift it off.
1
and turn it clockwise until the fuel tank is tightly closed.
2
1
is fitted on the left on the throttle valve body.
without kinks.
13