Idle Speed Adjusting Screw; Shift Lever; Foot Brake Lever - Husqvarna 2014 FC 450 EU Owner's Manual

6 CONTROLS
6.12

Idle speed adjusting screw

6.13

Shift lever

6.14

Foot brake lever

The idle setting of the throttle valve body has a big influence on the vehicle's starting
behavior, on stable idling, and on vehicle response when the throttle is opened. This
means that an engine with a correctly set idle speed is easier to start than if the idle is
set wrongly.
The idle speed is adjusted with idle speed adjusting screw
Increase the idle speed by turning the idle speed adjusting screw clockwise.
Decrease the idle speed by turning the idle speed adjusting screw counterclockwise.
B01923-10
Shift lever 1
401950-10
The gear positions can be seen in the photograph.
The neutral or idle position is between the first and second gears.
401950-13
Foot brake lever
The foot brake lever is used to activate the rear brake.
B01939-10
is mounted on the left side of the engine.
1
is located in front of the right footrest.
1
.
14