Sealing The Air Filter Box; Removing The Main Silencer; Installing The Main Silencer - Husqvarna 2014 FC 450 EU Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.29

Sealing the air filter box

11.30

Removing the main silencer

Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down. Do not touch hot components.
11.31

Installing the main silencer

Main work
–
Wash the air filter thoroughly in special cleaning liquid and allow it to dry properly.
Info
Only press the air filter to dry it, never wring it out.
–
Oil the dry air filter with a high quality filter oil.
–
Clean the air filter box.
–
Check the intake flange for damage and looseness.
L00189-10
Finishing work
–
Install the air filter.
–
Install the air filter box lid. (
x
–
Seal the air filter box in marked area
401559-01
Preparatory work
–
Remove the right side cover. (
Main work
–
Disconnect spring
–
Remove screws
B01886-10
Main work
–
Mount the main silencer. Mount screws
–
Reconnect spring
–
Tighten screws
Guideline
Remaining screws, chassis
B01886-11
Finishing work
–
Install the right side cover. (
( p. 43)
x
p. 42)
A
.
p. 45)
1
.
2
and take off the main silencer.
1
2
.
1
.
p. 46)
but do not tighten yet.
M6 10 Nm (7.4 lbf ft)
44