3.00 TST command (Test)
Before executing the device test, change the
status of the target device to "Out of Service" by
entering OUS command.
Command Format
OPE>TST + Index + Item1 + (& Item 2)
Test
Card Test
APITS/DPITS
P
O
ATT
R
T
Extension & CO line
SLC, HLC, OPX, MSLC,
T
ESLC, DHLC, LCOT,
E
S
GCOT, RCOT, PCOT
T
Basic Conference Trunk
Optional Conference Trunk
DISA/AGC
P
APITS/DPITS
I
T
S
&
ATT
A
T
T
Description
x : Shelf No. (1: Basic 2: Expansion 1
3: Expansion 2)
yy : Slot No. (01~14, or **)
zz : Port No. (01~16, or **)
a : Attendant console No. (1~2, or *)
dddd : Directory No. (3~4 digits)
tt : Basic Conference Trunk No. (01~08)
tt : Optional Conference Trunk No. (01~64)
Index
Item 1
1
Physical No. (xyy)
Physical No. (xyyzz) or
DN (DN dddd)
Physical No. (xyyzz) or
ATT No. (Aa)
(Extension) Physical No. (xyyzz)
or DN (DN dddd)
2
(CO line) Physical No. (xyyzz)
CFB tt (01 ~ 08)
CFO tt (01 ~ 64)
Physical No. (xyyzz)
Physical No. (xyyzz) or
DN (DN dddd)
3
Physical No. (xyyzz) or
ATT No, (Ax)
16-E-5
(Refer to Section 16-C-1.00 "Service Commands
and Their Functions" for details about OUS and
INS commands.)
(CO line) Physical No. (xyyzz)
(Extension) Physical No. (xyyzz) or
DN (DN dddd)
"*" can be used as a wild card character and
substitutes any number from 0 to 9.
(Example)
1** ------- All cards installed in the Basic shelf
105** ---- All ports assigned to the card No.5 in
the Basic shelf
2**** ----- All ports in the Expansion shelf 1
Item 2