Panasonic KX-TD500 System Reference Manual page 1494

Programming
Item
Shelf
Trunk
No. 1
-18
Slot
Extension
Shelf
Slot
D: Enter appropriate parameters directly.
S: Select appropriate parameters from the factory-set options.
• Cursor is scrolled from left to right by pressing the return key.
• Assign extension card and trunk card for power failure transfer in pairs.
To assign only a trunk or an extension is not possible.
Refer to Section 10-J-2.00 "Power Failure Transfer Assignment" for further
information about programming.
Conditions
SLT telephones and some PITS telephones can
be used during power failure if power failure
transfer assignment had been done in advance.
The following PITS telephones can be used
during power failure.
KX-T123230, KX-T123230D,
KX-T123235, KX-T61630, KX-T30830
When you are using above listed PITS tele-
phones, set the POWER FAILURE switch to ON,
when power failure occurs.
If dialing cannot be done, set the DIALING MODE
selector to another position (PULSE or TONE).
When the power is restored, set the POWER
FAILURE switch to OFF.
If the power is restored during a conversation, set
the POWER FAILURE switch to OFF after
conversation is completed.
When you use ESLC card for Power Failure
Transfer, #01 – #08 ports of ESLC card are only
available.
Description
Assign LCOT, GCOT, PCOT, or RCOT
card No. to the system which are
available for power failure transfer.
Assign HLC, SLC, DHLC, ESLC or
MSLC card No. to the system which
are available for power failure
transfer.
15-H-2
Assignable Default
Parameters Parameters
1,2,3 or blank Blank
01-14 or blank Blank
1,2,3 or blank Blank
01-14 or blank Blank
How to
input
D
D
D
D