Panasonic KX-TD500 System Reference Manual page 1297

8.00 Changing Walking COS
Password
This is used to change the walking COS password
for performing Walking COS.
For further information about Walking COS, refer to
Operation
1. Set PITS system
programming mode.
(See 12 - C - 1.01)
2. Dial "0 6". (program number)
3. Dial new password: four
digits.
4. Press the MEMORY button to
store the newly dialed
password.
To exit from the programming
mode (See 12 - C - 1.02)
Section 4-C-9.00 "Walking COS (Class of
Service)".
Result
• The message appears on the
display:
SYS-PGM No ?
• The MEMORY button
indicator lights in red.
• Current password appears on
the display:
<Example>
Walk PW: 1111
• The MEMORY button
indicator light goes out.
• Dialed password appears on
the display:
<Example>
Walk PW: 5555
• The MEMORY button
indicator lights in red.
• Confirmation tone sounds.
12-C-19
Comment/Note
• Values from 0 to 9, * , # can be
entered for the password.