Backup Utility Main Menu
------------------------------------------------------------------------------------+-------+ ------+ ------+ -------
| Receive File |
Please enter file name :
1 COMMON
2
3
4
Backup Utility Main Menu
------------------------------------------------------------------------------------+-------+ ------+ ------+-------
1. Load ( SIO 1 -> PBX )
2. Save ( PBX -> SIO 1 )
==>
1 COMMON
2
3
4
Backup Utility Main Menu
------------------------------------------------------------------------------------+ ------+-------+ ------+ -------
1. Load ( SIO 1 -> PBX )
2. Save ( PBX -> SIO 1 )
==> 2
***** Transfer End
1 COMMON
2
3
4
| OFL | BCK | LIN | DIR
5
6
7
8
| OFL | BCK | LIN | DIR
5
6
7
8
| OFL | BCK | LIN | DIR
5
6
7
8
17-B-5
3. Enter the file name and press the Enter key,
then the screen will return to the Backup
Utility Main Menu.
Procomm Plus start to receive the data from
PBX.
4. Enter 2 and press the Enter key.
PBX starts to send the system data.
If data transmission finishes, the following
message appears on the screen.
"***** Transfer End"
5. Press the ESC key to close the file.
6. End.