Panasonic KX-TD500 System Reference Manual page 1479

3.00 Device Status screen
3.01 System Status Initial screen
Device Status (1/6)
ROM Version -------------------------------
Date ----------------------------------------
For Place ----------------------------------
CPU RAM ------------------------------------
Basic Shelf ----------------------------------
Expansion Shelf 1 -------------------------
Expansion Shelf 2 -------------------------
TSW
Additional CONF -------------------------
Additional OHCA -------------------------
SMDR -----------------------------------------
Clock Mode ----------------------------------
Master Clock Card ----------------------
INS: In Service, OUS: Out of Service, FLT: Fault
1 COMMON 2
Description
ROM version
Date
For Place
CPU RAM
Basic Shelf
Expansion Shelf 1
Expansion Shelf 2
TSW
Additional CONF
Additional OHCA
SMDR
Clock Mode
Master Clock Card
"—" indicates that the device is not installed.
System Status
3 4
Software's version
The date software was originated
Destination
Current status of RAM area
Current status of Basic Shelf
Current status of Expansion Shelf 1
Current status of Expansion Shelf 2
Current status of TSW card
Current status of TSW optional Coference card
Current status of TSW optional OHCA card
Current status of SMDR device
Displayed only when T-1 or E-1 trunk card is installed.
"External" is displayed when the system synchronizes with the external clock.
"Internal" is displayed when the system synchronizes with the internal clock.
Displayed only T-1 or E-1 trunk card is installed.
"XXX" (physical card No. of the master card) is displayed when the external
clock mode is utilized.
"–" is displayed when the internal clock mode is utilized.
15-G-3
ONL MON
V1.00
May.08 1991
Area-2
INS
INS
INS
INS
INS
INS
INS
INS
External
101
5 6 HRD CPY 7 8