Panasonic KX-TD500 System Reference Manual page 1035

Description of Assigning Items
Destination (DIL 1:N only)
Type and Number
DID Digit Modification Table Assigns the digit modification table to be used for DID calls. This allows
PBX Access Code (No
Restriction)
PBX Access Code
(Restriction)
Max. Dial No. after EFA
Signal
Conditions
Same as "Group-Trunk Group (1/3)" screen.
Function
Same as "Group-Trunk Group (1/3)".
Assigns destination type and number only when "Incoming Mode (Day)" is
set to DIL 1: N (the function which enables an incoming call from one CO
line in one trunk group to arrive at one to eight destinations simultaneously
without assistance of operator).
Orderly setting is not necessary and inserting blanks between the items is
permissible.
the DID incoming digits to be modified to match the numbering plan.
In behind PBX or Centrex operation it is necessary for the system to
send an access code to the host PBX or Centrex followed by a pause.
This feature assigns the access code to be sent.
This is the same as PBX Access Code with Pause except that the digits
following the access code are checked by the system for toll restriction.
Assigns maximum dialing digits after sending EFA (External Feature
Access) signal.
10-E-11