Panasonic KX-TD500 System Reference Manual page 1553

Backup Utility Main Menu
------------------------------------------------------------------------------------+ ------+ ------+ ------+ -------
| Upload Protocol 375610 Byte Free |
X) XMODEM
Z) ZMODEM
Y) YMODEM (Batch)
G) YMODEM-G (Batch)
O) IK-XMODEM
E) IK-XMODEM-G
C) COMPUSERVE BT
K) KERMIT
S) SEALINK
Your Selection :
==>
1 COMMON 2 3 4
Backup Utility Main Menu
------------------------------------------------------------------------------------+ ------+ ------+ ------+-------
| Send File |
Please enter file name :
1 COMMON 2 3 4
Backup Utility Main Menu
------------------------------------------------------------------------------------+-------+ ------+-------+-------
1. Load ( SIO 1 -> PBX )
2. Save ( PBX -> SIO 1 )
==> 1
***** Transfer End
1 COMMON 2 3 4
| OFL | BCK | LIN | DIR
A) ASCII
R) RAW ASCII
T) TELINK
M) MODEM7
W) WXMODEM
I) IMODEM
1 [EXT 1]
2 [EXT 2]
3 [EXT 3]
5 6 7 8
| OFL | BCK | LIN | DIR
5 6 7 8
| OFL | BCK | LIN | DIR
5 6 7 8
17-B-7
3. Press the R key to select "RAW ASCII", then
the file name entry box will appear on the
screen.
4. Enter the file name and press the Enter key.
Procomm Plus start to send the data to PBX.
5. If data transmission finishes, the message,
"***** Transfer End", will appear on the
screen.
6. End.