ECM Elektronika II Prof User Manual page 29

4
Remove the shower plate and the gasket
completely.
7
Insert the shower plate into the gasket.
10
Then turn the filter holder until the
shower plate is locked firmly into the
gasket.
The machine can be used again, as described on page 23 of the instruction manual.
The steam nozzle is blocked
Clean the holes of the steam nozzle carefully with a needle or with a paper clip.
You can unscrew for this purpose also the steam nozzle.
Replace the steam nozzle.
Important!
Do not lose the small gasket between the steam nozzle and the thread!
Instruction manual ELEKTRONIKA II PROFI
5
Keep the new spare parts ready at hand
(the chamfered side of the group facing
upwards to the brew group).
8
Take the filter holder without filter.
11
You can now easily lock the filter holder
into place.
28
6
Clean the group with a brush.
Lock the shower plate firmly into the
gasket.
9
Clamp the filter holder in to the group.
12
The group is ready for use.
ΕNGLISH