4.3.3 HTTP Client Settings
Value Range
Default Value
Configuration File Reference
Authentication ID
Description
Value Range
Default Value
Configuration File Reference
Authentication Password
Description
Value Range
Default Value
Configuration File Reference
4.3.3.2 Proxy Server
Enable Proxy
Description
Value Range
Default Value
Configuration File Reference
82
Administrator Guide
Max. 64 characters
Note
•
If "{mac}" is included in this parameter, it will be replaced with
the unit's MAC address in lower-case.
•
If "{MAC}" is included in this parameter, it will be replaced with
the unit's MAC address in upper-case.
•
If "{MODEL}" is included in this parameter, it will be replaced
with the unit's model name.
•
If "{fwver}" is included in this parameter, it will be replaced with
the firmware version of the unit.
Panasonic_{MODEL}/{fwver} ({mac})
HTTP_USER_AGENT (Page 175)
Specifies the ID for the User account. If set, this name must be entered
to access the Web user interface at the User access level.
Max. 128 characters
Not stored.
HTTP_AUTH_ID (Page 175)
Specifies the password for the User account. If set, this password must
be entered to access the Web user interface at the User access level.
Max. 128 characters
Not stored.
HTTP_AUTH_PASS (Page 175)
Selects whether to enable or disable the HTTP proxy feature.
•
Yes
•
No
No
HTTP_PROXY_ENABLE (Page 175)
Document Version 2015-02