Http Client Settings; Http Version; Http User Agent; Http Authentication - Panasonic KX-UT133-B Administrator's Manual

4.3.3.1 HTTP Client Settings

HTTP Version

Description
Value Range
Default Value
Configuration File Reference

HTTP User Agent

Description
Value Range
Default Value
Configuration File Reference

4.3.3.2 HTTP Authentication

Authentication ID

Description
Value Range
Default Value
Document Version 2011-06
Selects which version of the HTTP protocol to use for HTTP
communication.
•
HTTP/1.0
•
HTTP/1.1
Note
•
For this unit, it is strongly recommended that you select [HTTP/
1.0]. However, if the HTTP server does not function well with
HTTP/1.0, try changing the setting [HTTP/1.1].
HTTP/1.0
HTTP_VER (Page 174)
Specifies the text string to send as the user agent in the header of HTTP
requests.
Max. 40 characters
Note
•
You cannot leave this field empty.
•
If "{mac}" is included in this field, it will be replaced with the
unit's MAC address in lower-case.
•
If "{MAC}" is included in this field, it will be replaced with the
unit's MAC address in upper-case.
•
If "{MODEL}" is included in this field, it will be replaced with the
unit's model name.
•
If "{fwver}" is included in this field, it will be replaced with the
firmware version of the unit.
Panasonic_{MODEL}/{fwver} ({mac})
HTTP_USER_AGENT (Page 174)
Specifies the ID for the User account. If set, this name must be entered
to access the Web user interface at the User access level.
Max. 127 characters
Not stored.
4.3.3 HTTP Client Settings
Administrator Guide 77