Telephone-Event Payload Type; Voice Quality Report; Server Address; Port - Panasonic KX-HDV100 Administrator's Manual

4.5.3 VoIP Settings
Configuration File Reference

Telephone-event Payload Type

Description
Value Range
Default Value
Configuration File Reference

4.5.3.2 Voice Quality Report

Server Address

Description
Value Range
Default Value
Configuration File Reference

Port

Description
Value Range
Default Value
Configuration File Reference

Enable PUBLISH

Description
Value Range
Default Value
Configuration File Reference
112 Administrator Guide
RTP_PORT_MAX (Page 232)
Specifies the RFC 2833 payload type for DTMF tones.
Note
•
This setting is available only when [DTMF Type] is set to
[Outband].
96–127
101
TELEVENT_PAYLOAD (Page 223)
Specifies the IP address or FQDN of the collector server.
Max. 256 characters
Not stored.
VQREPORT_COLLECTOR_ADDRESS (Page 235)
Specifies the port of the collector server.
1–65535
5060
VQREPORT_COLLECTOR_PORT (Page 236)
Selects the sending type of the VQ report using PUBLISH.
•
Disable
•
End of Session Report Using PUBLISH
•
Interval report Using PUBLISH
•
Alert Report Using PUBLISH
Disable
VQREPORT_SEND (Page 236)
Document Version 2015-02