5.3.23 RTP/RTCP/RTCP-XR Settings
Description
Value Range
Default Value
RTP_PORT_MIN
Value Format
Description
Value Range
Default Value
Web User Interface Reference
RTP_PORT_MAX
Value Format
Description
Value Range
Default Value
Web User Interface Reference
RTP_PTIME
Value Format
Description
Value Range
Default Value
Web User Interface Reference
RTP_TARGET_CHECK
Value Format
232
Administrator Guide
Specifies the initial delay, in 10-millisecond units, of the jitter buffer.
1–7 (´ 10 ms)
Note
•
This setting is subject to the following conditions:
–
This value must be greater than or equal to "MIN_DELAY"
–
This value must be less than "MAX_DELAY"
1
INTEGER
Specifies the lowest port number that the unit will use for RTP packets.
1024–59598 (only even)
16000
Minimum RTP Port Number (Page 111)
INTEGER
Specifies the highest port number that the unit will use for RTP packets.
1424–59998 (only even)
20000
Maximum RTP Port Number (Page 111)
INTEGER
Specifies the interval, in milliseconds, between transmissions of RTP
packets.
•
20
•
30
•
40
20
RTP Packet Time (Page 111)
INTEGER
Document Version 2015-02