Description
Value Range
Default Value
Web User Interface Reference
VLAN_PRI_IP_PHONE
Value Format
Description
Value Range
Default Value
Web User Interface Reference
LLDP_ENABLE
Value Format
Description
Value Range
Default Value
Web User Interface Reference
LLDP_INTERVAL
Value Format
Description
Value Range
Default Value
Web User Interface Reference
Document Version 2015-02
Specifies the VLAN ID for this unit.
0–4094
2
VLAN ID (Page 80)
INTEGER
Specifies the priority number for the unit.
0–7
7
Priority (Page 81)
BOOLEAN
Specifies whether to enable or disable the LLDP-MED feature.
Note
•
You should specify "Y" for only one of "LLDP_ENABLE", or
"VLAN_ENABLE". If "Y" is specified for two or more of the
parameters above, the settings are prioritized as follows:
VLAN_ENABLE >LLDP_ENABLE. Therefore, if "Y" is specified
for both "VLAN_ENABLE" and "LLDP_ENABLE", the
VLAN-related settings are used.
•
Y: Enable LLDP-MED
•
N: Disable
Y
Enable LLDP (Page 79)
INTEGER
Specifies the interval, in seconds, between sending each LLDP frame.
1–3600
30
Packet Interval (Page 80)
5.3.3 Ethernet Port Settings
Administrator Guide
167