5.3.7 HTTP Settings
Default Value
Web User Interface Reference
FIRM_FILE_PATH
Value Format
Description
Value Range
Default Value
Web User Interface Reference
FIRM_VERSION
Value Format
Description
Value Range
Default Value
5.3.7 HTTP Settings
HTTP_VER
Value Format
Description
Value Range
Default Value
Web User Interface Reference
174
Administrator Guide
Y
Enable Firmware Update (Page 138)
STRING
Specifies the URL where the firmware file is stored.
Note
•
This setting is available only when
"FIRM_UPGRADE_ENABLE" is set to "Y".
Max. 384 characters
Empty string
Firmware File URL (Page 138)
STRING
Specifies the firmware version of the unit.
Max. 32 characters
Empty string
INTEGER
Specifies which version of the HTTP protocol to use for HTTP
communication.
•
1 (Use HTTP 1.0)
•
0 (Use HTTP 1.1)
Note
•
For this unit, it is strongly recommended that you specify "1" for
this setting. However, if the HTTP server does not function well
with HTTP 1.0, try changing the setting "0".
1
HTTP Version (Page 81)
Document Version 2015-02