5.3.2 Basic Network Settings
Description
Value Range
Default Value
Web User Interface Reference
STATIC_SUBNET
Value Format
Description
Value Range
Default Value
Web User Interface Reference
STATIC_GATEWAY
Value Format
Description
Value Range
Default Value
Web User Interface Reference
162
Administrator Guide
Specifies the IP address for the unit for IPv4.
Note
•
This setting is available only when "CONNECTION_TYPE" is
set to "0".
•
When you specify this parameter, you must specify
"STATIC_SUBNET" together in a configuration file.
Max. 15 characters
n.n.n.n [n=0–255]
Empty string
IP Address (Page 75)
IPADDR
Specifies the subnet mask for IPv4.
Note
•
This setting is available only when "CONNECTION_TYPE" is
set to "0".
•
When you specify this parameter, you must specify
"STATIC_IP_ADDRESS" together in a configuration file.
Max. 15 characters
n.n.n.n [n=0–255]
Empty string
Subnet Mask (Page 75)
IPADDR
Specifies the IP address of the default gateway for the IPv4 network
where the unit is connected.
Note
•
This setting is available only when "CONNECTION_TYPE" is
set to "0".
•
When you specify this parameter, you must specify
"STATIC_IP_ADDRESS" and "STATIC_SUBNET" together in
a configuration file.
Max. 15 characters
n.n.n.n [n=0–255]
Empty string
Default Gateway (Page 75)
Document Version 2015-02