5.3.4 Firmware Update Settings
FIRM_VERSION
Value Format
Description
Value Range
Default Value
FIRM_UPGRADE_AUTO
Value Format
Description
Value Range
Default Value
Web User Interface Reference
FIRM_FILE_PATH
Value Format
Description
178
Administrator Guide
String
Specifies the firmware version of the unit.
Note
•
Changing this setting may require restarting the unit.
00.000–15.999
Empty string
Boolean
Specifies whether to display a confirmation message asking the user
to perform a firmware update (manual) or perform the firmware update
without asking the user (automatic) when the unit detects a newer
version of firmware.
Note
•
This setting is available only when
"FIRM_UPGRADE_ENABLE" is set to "Y".
•
Changing this setting may require restarting the unit.
•
Y (Enable automatic firmware update)
•
N (Disable automatic firmware update)
Y
Update Type (Page 147)
String
Specifies the URL where the firmware file is stored.
Note
•
This setting is available only when
"FIRM_UPGRADE_ENABLE" is set to "Y".
•
Changing this setting may require restarting the unit.
Document Version 2013-03