Making H.323 Settings - Panasonic KX-VC300 User Manual

Contacts and Settings

Making H.323 Settings

Note
•
These settings can only be made in IP mode
(Page 115) and when "H.323" is set to "ON" on
the call type settings screen.
•
When connecting to an MCU by entering the
MCU's conference room number@IP address,
"SIP Server" (Page 116) and "Gatekeeper"
must be set to "OFF".
•
If video conference calls cannot be made
because there is a problem with the gatekeeper
and H.460 server, the H.323 settings are
incorrect (on the gatekeeper and the H.460
server, or on the unit), etc., "Not registered"
will be displayed on the Home screen instead of
the H.323 extension/H.323 name. In this case,
you cannot make calls using either IP
addresses or the gatekeeper and H.460 server.
Contact your network administrator.
1.
Log in to the administrator menu (Page 112).
•
The administrator menu screen is displayed.
2.
Press [ ].
•
The second page is displayed.
3.
Use [ ][ ] to select "H.323 Settings" and press
[Enter].
•
The H.323 settings screen is displayed.
4.
Use [ ][ ] to select the following items for input:
"Gatekeeper": Use [
"OFF" (default).
Note
•
This setting is available only when "ON" is
selected for "H.323" (Page 116) and
118 User Manual
][ ] to select "ON" or
"OFF" is selected for "SIP Server" (Page
116).
"Gatekeeper Address": Enter the gatekeeper's IP
address (or host name).
Note
•
If the IP address contains 1 or 2 digit
numbers, enter these numbers as they are.
Do not enter like [.001].
Example: The IP address is [192.168.0.1].
–
Correct entry: [192.168.0.1]
–
Wrong entry: [192.168.000.001]
•
The DNS server setting is necessary to
enter host names (Page 97).
•
See Page 40 for details about the
characters that can be input for host names.
"H.323 Name": Enter the H.323 name.
Alphanumeric characters and the symbols . = * + _
- $ ! ? / ' ( ) can be entered (up to 60 characters).
"H.323 Extension": Enter the H.323 extension.
Numeric characters and the symbols # and * can be
entered (up to 20 characters).
Note
•
Enter a standards-compliant value. For
details, contact your network administrator.
"Authentication": Use [
to enable authentication.
–
"ON": Enables authentication.
–
"OFF" (default): Disables authentication.
"Authentication ID": Enter an authentication ID
(1–60 characters [alphanumeric, space, symbols])
(Page 137). &, <, >, comma (,), double quotation
mark (") cannot be entered.
"Authentication Password": Enter an
authentication password (0–60 characters
[alphanumeric, space, symbols]) (Page 137). &, <,
>, comma (,), double quotation mark (") cannot be
entered.
Note
•
"Authentication ID" and "Authentication
Password" can only be set when
"Authentication" is set to "ON".
•
While being entered, the characters of the
authentication password are displayed, but
once the settings are saved, all the
characters will be displayed as asterisks (*),
and you will no longer be able to check the
authentication password on the screen.
Record the authentication password
beforehand, and store it in a safe location.
][ ] to select whether
Document Version 2013-09