Judgment Output Reading; External Input - Panasonic SC-HG1-C User Manual

CC-LINK Network Communication

4-6 Judgment output reading

You can get the external output and alarm output of each controller by reading RX[20] to [2E],
RX[30] to [3E], RX[40] to [4E], and RX[50] to [5E] in the memory map.
These values are always kept updated to the most recent state, so operations such as com-
mand setting are not needed.
For detailed information on external output and alarm functions, refer to the user's manual of
the controller that you use.
<Reference>
Judgment output reading is updated automatically.
Remote output RX (SC-HG1-C → Master)
RX F
Sensor
Commu-
nication
Function unit
+20 OUT1 0
+30 OUT2 0
+40 OUT3 0
+50 Alarm 0

4-7 External input

Control of external input from the master unit cable and external input from the SC-HG1-C is by
OR operation.
4-30
E D C B
Slave Slave Slave Slave
unit unit unit unit
14 13 12 11
0 0 0 0
0 0 0 0
0 0 0 0
0 0 0 0
Example: To check the external output signal and alarm func-
tion signal of slave unit 2, read RX[22], [32], [42], [52].
Example: To check the external output signal and alarm function
signal of the master unit, read RX[20], [30], [40], [50].
A 9 8 7
Slave Slave Slave Slave
unit unit unit unit
10 9 8 7
0 0 0 0
0 0 0 0
0 0 0 0
0 0 0 0
Settings from the SC-HG1-C and input from
external input are by OR operation.
When either turns ON, the controller executes
ON operation.
6 5 4 3
Slave Slave Slave Slave
unit unit unit unit
6 5 4 3
0 0 0 0
0 0 0 0
0 0 0 0
0 0 0 0
WUME-SCHG1C-4
2 1 0
Slave Slave
Master
unit unit
unit
2 1
0 0 0
0 0 0
0 0 0
0 0 0