Advanced Timer Recording; Manually Programming Timer Recordings; To Cancel Recording When Recording Has Already Begun; To Release The Unit From Recording Standby - Panasonic DMR-EX71S Operating Instructions Manual

Advanced timer recording

Manually programming timer
recordings
1
Press [PROG/CHECK].
Timer
Remain HDD
Recording
No. Name Date Start
New Timer Programme
2
Press [3, 4] to select "New Timer
Programme" and press [OK].
3
Press [1] to move through the items
and change the items with [3, 4].
Timer
Remain HDD
Recording
Name Date Start
1 Das E 21. 10. TUE 22:00
TV :Das Erste
≥When "Name" is selected, you can press the "Blue" button to
change the profile [e.g., TV, Radio, edited profiles (
and then press [3, 4] to select the channel you want to
record.
≥Press and hold [3, 4] to alter the Start (Start time) and Stop
(Finish time) in 30-minute increments.
≥You can also set Name (Programme position/TV Station
Name), Date, Start (Start time), and Stop (Finish time) with
the numbered buttons.
≥Date
[. Date:
l
;:
l
Daily timer:
l
;:
l
a. Weekly timer: SUN>--->SAT
Titles recorded using the same daily or weekly timer are
bundled and displayed as a "group" in the Direct Navigator
screen ( 30) except when using Auto Renewal Recording.
≥You can also press [DRIVE SELECT] to select the recording
drive.
When the recording drive is "DVD" and there is not enough
remaining space, recording automatically switches to the
"HDD" ( right).
≥You can also press [REC MODE] to change the recording
mode.
≥[HDD] RENEW (Auto Renewal Recording) (
ON!)OFF
≥Programme Name
Press [2, 1] to select "Programme Name" and press [OK].
( 39, Entering text)
≥STTL (Subtitles)
ON!)OFF
When the "Name" column is set in AV1, AV2 or AV3, On/Off
setting is unavailable.
You can also press [STTL
When there are multiple languages, select the subtitle
( 61, DVB Preferred Language).
4
Press [OK].
The timer programme is stored and the timer icon is
displayed.
"F" lights on the unit's display to indicate timer recording
standby has been activated.
TUE 14.10.08. 12:56:00
HDD
Stop Mode
STTL
DVD
22:30 HDD SP OFF
ogramme
Repeat steps 2–4 to programme other recordings.
RQT9193
Press [Í DVD] to turn the unit off.
26
1:58 SP
30:24 SP DVD
TUE 14.10.08. 12:54:00
HDD Drive
Stop Mode
STTL
DVD space
1:58 SP
30:24 SP DVD
TUE 14.10.08. 12:54:00
HDD
Stop Mode STTL
DVD
22:30 HDD SP OFF
Programme Name
Current date up to one month later minus
one day
SUN-SAT>MON-SAT>MON-FRI
] to switch "STTL" setting.
No. Name

01
Timer icon
Drive
space
Check to make sure "OK" is
OK
displayed ( 27).
To cancel recording when recording
has already begun
1
While the unit is on
Press [DRIVE SELECT] to select the
recording drive and press [∫].
Stop Recording
2
Press [2, 1] to select "Stop
Recording" and press [OK].
If you stop a timer recording, it will be cancelled. However, if
you have set a weekly or daily timer recording, the recording
will start from the next time the timer recording is set.
To release the unit from recording
standby
Even when the unit is turned off, you can display the timer recording
60)]
list by pressing [PROG/CHECK].
1
Press [PROG/CHECK].
2
Press [3, 4] to select the programme
and press the "Red" button.
≥The timer icon "F" (
recording list.
≥You cannot cancel timer recording standby mode as long as
even one timer icon "F" (
recording list.
≥Press the "Red" button again to activate timer recording
standby.

Relief Recording

When the recording drive is "DVD" and there is not enough
remaining space, recording automatically switches to the "HDD". If
there is no disc in the tray or the disc cannot be recorded on or when
timer recording starts while copying, the recording drive will be
altered to the HDD.
≥The Direct Navigator shows which programmes were relief-
right)
recorded ("
≥If the time remaining on the HDD is insufficient, as much of the
programme as possible will be recorded onto the HDD.

Auto Renewal Recording

[HDD]
If you record a programme onto HDD repeatedly everyday or every
week using timer recording, the unit will record the new programme
over the old one.
This function can be used only when weekly recording or daily
recording is selected.
1
Press [PROG/CHECK].
2
Press [3, 4] to select the programme
and press [OK].
3
Press [2, 1] to select "RENEW"
Das E
column.
4
Press [3, 4] to select "ON" and press
[OK].
Timer
Recording
Name
1 Das E
Stop Recording
Timer recording in progress.
Stop this timer recording?
It will be cancelled if you stop.
Cancel
SELECT
RETURN
OK
27) disappears from the timer
27) remains in the timer
" is displayed.) ( 30).
1:58 SP
Remain HDD 30:24 SP DVD
TUE 14.10.08. 12:53:00
HDD
RENEW
Date Start Stop Mode STTL
DVD
SUN 22:00 22:30 HDD SP OFF ON
Programme Name