Procedure 7.19 - Replacing A Moveable Handlebar - Precor EFX5.31 Instruction Manual

Procedure 7.19 - Replacing a Moveable Handlebar

1. Set the on/off switch in the "off" position, then unplug the power cord from the wall outlet.
2. Remove the bolt that fasten the forward end of the connecting link to the moveable
handlebar. See Diagram 7.16
Diagram 7.16 - Moveable Handlebar, Lower End
Connecting Link
3. The rearward end of the connecting link will either be attached to the stairarm or to its
storage point on the frame. Depress the orange button and remove the connecting link.
Removing the connecting link prevents it from resting on the outrigger tube and will prevent
the painted surfaces of the outrigger tube and connecting link from damage.
Diagram 7.17 - Handlebar Connecting Link
Moveable
Handlebar