Thermador PRSG304 Installation Instructions Manual page 5

FIG. 2a Side View 30" Ranges
Optional
High
Shelf
42" Min. to
∆
Combustibles
Std.
Low Back
Guard
(Provided
with 30" Range)
PRSG304 - 16-1/2"
PRSE304 -18-3/8"
∆
as defined in the "National Fuel Gas Code" (ANSI Z223.1, Current Issue).
FIG. 2c Side View 30", 36" and 48" Ranges
12" Min. to
Combustibles
without Backguard
42" Min. to
or with Island Trim
∆
Combustibles
30" Ranges – 24-3/8"
36" & 48" Ranges –25"
30" Ranges – 26-3/8"
PRSE36 - 28"
PRSE48 - 27"
Com-
bustible
Materials ∆
28-3/4"
27-5/8"
10"
2"
9"
0"
Clearance
➝
24-3/8"
26-3/8"
Com-
bustible
Materials ∆
∆
Island
Trim
1-1/2"
0"
Clearance
➝
STEP 2: CABINET PREPARATION
FIG. 2b
42" Min. to
∆
Combustibles
22"
PRSE36 - 15-3/8"
PRSE48 - 16-3/8"
Do not install the Model PRES304
and PRSE48 ranges such that the
front surface of the oven door is
flush with the cabinet face. A flush
installation could result in damage
to the cabinets due to high heat.
The face of the cabinet should line
up with the oven front frame. The
front frame location relative to the
rear of the range is 24-3/8" on the
PRSE304 and 25" on the PRSE48,
as shown in Figures 2a, 2b and 2c.
Page 5
Side View 36" and 48" Ranges
30-3/4"
29-3/8"
12"
High
Shelf
Low
Back
Guard
➝
25"
PRSE36 - 28"
PRSE48 - 27"
CAUTION:
Com-
bustible
Materials ∆
3-1/2"
22"
12"
0"
Clearance