Hard Drive - HP ProBook 470 G3 Maintenance And Service Manual

Hard drive

Description
Hard drives
2 TB, 5400 rpm, 9.5 mm
1 TB, 5400 rpm, 7 mm
500 GB, 5400 rpm, 7 mm
500 GB, 5400 rpm, 7 mm, hybrid (8-GB SSD)
500 GB, 7200 rpm, 7 mm
Before removing the hard drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the large service door (see
To remove a hard drive:
1. Remove the 4 Phillips PM2.5×5.0 screws (1) that secure the hard drive to the chassis.
2. Pull the plastic tab to slide the hard drive (2) away from the center of the computer to disengage it from
the connector.
36 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
Battery on page 31).
Service doors on page
Spare part number
801808-001
778192-001
778187-001
732000-001
634920-001
32).