Table of Contents
Advertisement
10.
If it is necessary to remove the display panel from the enclosure, remove the 4 Phillips PM2.0×3.0
screws (1) that secure the panel to the display enclosure, and then rotate the display panel all the way
over (2).
The raw display panel is available using spare part number 827046-001 for FHD panels and 827047-001
for HD+ panels.
11.
Lift the display cable connector clip (1), and then disconnect the cable from the rear of the panel (2).
12.
Remove the display panel (3) from the enclosure.
80
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Hide quick links:
Advertisement
Table of Contents
