Optical Drive - HP ProBook 470 G3 Maintenance And Service Manual

Optical drive

Description
Blu-ray Disc R/RW with SuperMulti Drive
DVD+/-RW Double-Layer SuperMulti Drive
DVD-ROM Drive
Before removing the hard drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the large service door (see
To remove a optical drive:
1. Remove the Phillips PM2.5×7.0 screw (1) that secures the optical drive to the computer.
2. Insert a tool into the slot near the memory modules and push the optical drive to disengage it (2).
3. Remove the optical drive from the computer (3).
34 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
Battery on page 31).
Service doors on page
Spare part number
827018-001
827020-001
827019-001
32).