Assembling The Thermostat Assembly; Installing The Thermostat Assembly - Yamaha 2002 TDM900 Service Manual

THERMOSTAT
EAS00464
ASSEMBLING
SEMBLY
1. Install:
S thermostat housing 1
S thermostat 2
S O-ring
New
S thermostat housing cover
NOTE:
Install the thermostat with its breather hole a
facing up.
2. Install:
S thermo unit 1
CAUTION:
Use extreme care when handling the thermo
unit. Replace any part that was dropped or
subjected to a strong impact.
EAS00467
INSTALLING
SEMBLY
1. Install:
S thermostat assembly
S bracket
2. Fill:
S cooling system
(with the specified amount of the recom-
mended coolant)
Refer to "CHANGING THE COOLANT " in
chapter 3.
3. Check:
S cooling system
Leaks ! Repair or replace any faulty part.
4. Measure:
S radiator cap opening pressure
Below the specified pressure ! Replace the
radiator cap.
Refer to "CHECKING THE RADIATOR".
6-7
COOL
THE THERMOSTAT
3
18 Nm (18 mSkg)
THE THERMOSTAT
AS-
AS-