Assembling The Thermostat Assembly; Installing The Thermostat Assembly - Yamaha YZF-R1P Service Manual

THERMOSTAT
EAS00464
ASSEMBLING THE THERMOSTAT
ASSEMBLY
1. Install:
• thermostat housing 1
• thermostat 2
• O-ring
New
• thermostat housing cover 4
NOTE:
_
Install the thermostat with its breather hole a
facing up.
2. Install:
• coolant temperature sensor 1
CAUTION:
_
Use extreme care when handling the
thermo switch and temperature sender.
Replace any part that was dropped or sub-
jected to a strong impact.
EAS00466
INSTALLING THE THERMOSTAT
ASSEMBLY
1. Fill:
• cooling system
(with the specified amount of the recom-
mended coolant)
Refer to "CHANGING THE COOLANT" in
chapter 3.
2. Check:
• cooling system
Leaks → Repair or replace any faulty part.
3. Measure:
• radiator cap opening pressure
Below the specified pressure → Replace
the radiator cap.
Refer to "CHECKING THE RADIATOR".
6 - 11
COOL
3
18 Nm (1.8 m · kg, 13 ft · lb)