Assembling The Crankcase - Yamaha 2002 TDM900 Service Manual

CRANKSHAFT
EAS00415

ASSEMBLING THE CRANKCASE

1. Lubricate:
S crankshaft journal bearings
(with the recommended lubricant)
Recommended lubricant
Engine oil
2. Apply:
S sealant
(onto the crankcase mating surfaces)
Yamaha bond No. 1215
90890-85505
NOTE:
Do not allow any sealant to come into contact
with the oil gallery or crankshaft journal bear-
ings. Do not apply sealant to within 2 X 3 mm of
the crankshaft journal bearings.
3. Install:
S dowel pin 1
S oil jet nozzle
4. Install:
S crankshaft journal lower bearings
(into the lower crankcase)
NOTE:
S Align the projections a on the crankshaft jour-
nal lower bearings 1 with the notches b in
the lower crankcase.
S Install each crankshaft journal lower bearing in
its original place.
5. Install:
S lower crankcase 1
(onto the upper crankcase 2 )
5-83
ENG